YH2M8690 Automatic Positioning Surface Polishing Machine
Category: Product Center
Keywords: Yuhuan
Typical Machined Parts
3d Mobile Phone Cover Glass
2.5D Mobile Phone Glass
Equipment Highlights
● The equipment adopts continuous and uninterrupted polishing, loading and unloading methods, 3 stations for processing and 1 station for loading and unloading.
● The equipment has 3 sets of independent servo lifting processing station loading system, and the loading position of the loading plate is feedback controlled by the motor current.
● The rotation of the lower plate station is driven by a frequency conversion motor + worm gear reducer, and is positioned by a pin.
● This machine is equipped with vacuum air-liquid separation device, real-time monitoring of negative pressure, touch screen + PLC control mode.
Technical Parameter
|
Project |
Unit |
Parameter |
|
product tray |
mm |
12xφ420 |
| scan CD |
mm |
3xφ920 |
| Upper plate lift motor |
kW |
3x2.3 |
| Bottom plate rotation motor (frequency conversion motor) |
kW |
4x2.2 |
| Lower plate station conversion motor (frequency conversion motor) |
kW |
4.0 |
| Scanning disc motor (frequency conversion motor) |
kW |
3x5.5 |
| On the stroke |
mm |
200 |
| Lower plate station conversion speed |
rpm |
0-10 |
| Bottom plate rotation speed |
rpm |
0-40 |
| Scan disc speed |
rpm |
0-280 |
| Air supply pressure |
Mpa |
0.6 |
| Vacuum adsorption pressure |
Kpa |
-75 |
| power pressure |
V |
Three-phase five-wire AC380V |
| total equipment power |
kW |
36 |
| Total mass of equipment |
kg |
4900 |
| Equipment size |
mm |
2540x2540x2600 |
Related Products